SAFETY NOTE
This product is not a toy and suitable for users older than 14 years old only.
Never allow water, moisture, oil or other foreign materials to get inside ESC, motor, or on
the PC Boards. It may damage your ESC.
Never disassemble the ESC and modify the components on the PC Boards.
Suggest using the original wires and connectors which are packed in the box.
Please make sure the location where to fix the ESC has good airflow ventilating so that
the heat could dissipate quickly.
To avoid short circuit, please keep the ESC connectors far away from other metal parts.
Never connect the battery in reversed polarity.
Before you switch on the ESC, please make sure all the cables are well soldered with
the connectors (It is easy to get loose when running).
make sure the
cannot touch the moving parts.
Improper motor timing will increase the temperatures of ESC and brushless motor. Use
extremely caution when setting up and testing your application to avoid overloading and
overheating.
To avoid signal interference, please always turn on the transmitter first THEN turn on the
ESC. Do the opposite sequence when powering off.
Never use faulty accessories, a broken motor may damage the ESC. Always insulate
exposed wiring with heat shrink tubing or electrical tape to prevent short circuits, which
can damage ESC too.
Always disconnect the battery pack from the speed control when not in use to avoid
short circuits and possible fire hazard. When the ESC is switched off, there is still a micro
current and it may cause over discharge of the battery after some time.
The ESC can support 4-8 cells LiPo battery.
2
Note : We will not be responsible for any damage caused by non-compliance with above
instruction.
When you are doing soldering work, do not heating a same spot for more than 5 seconds as
some components will get damaged by high temperature.
Never run your motor without load at full throttle and it may damage the bearings and other
moving parts.
Please remove output gear before you performing calibration and programming. Please keep
your fingers, hair, cloth, clear away from the gear train or wheels of an armed high performance
motor.
And
cables
Содержание 1/5 Brushless Sensorless Car ESC
Страница 10: ...NOTES 10...
