Tracer Xtreme LE, Инструкция по эксплуатации

Страница: 14 / 48

14
Instructions for use
EN
Tracer Camera
Xtreme LE
Start Operation
Battery
This camera uses the original packaged built-in rechargeable 3.7V lithium
battery.
Battery disassembly is prohibited.
Attention:
• Please disconnect power supply of the camera before replacing the memory
card;
• Keep a correct direction to plug the card in. Gently plug the card to void card
or camera parts damaged. In case of fail to plug in, check it is in a correct
direction to plug in;
• Please format the memory card before the first time of use, using a card
having been used on other cameras.
Power-on/off
Press and hold power key for 2 seconds and release it for power-on/of the
camera.
Mode switchover
After power-on, the camera enters the default mode of video recording at a de-
fault size of Lo. In video recording mode at Lo size, click MODE key to switch
the size to HI; in video recording mode at HI size, click MODE key to enter
capture mode at Lo size, and in capture mode at Lo size, click MODE key to
return to video recording mode at Lo size.
Attention:
• Video recording mode: Lo indicates VGA (640x480) 60 frames, Hi indicates
HD (1280x720) 30 frames
• Capture mode: Lo indicates 1.3M (1280x960), Hi indicates 5M (2592x1944)