www.tracer.eu
11
Professional Carbon Racer
Function Description
1. Mode change:
1) Three modes for your choice Digital (Led off), Analog (Led on), Negcon (Led
fl
ashes).
Digital Mode:
The digital mode will work with all games that don’t support analog but is
nearly impossible to use because you are either turning all the way or not at
all.
Analog Mode:
When the controller is in analog mode , the following sticks may be operated
in analog fashion depending on the features supported by the software.
NeGcon Mode:
This mode provides support for games that use Steering Wheel and NeGcon
protocols. Some compatible titles will support a calibration from within the
software. This will allow the user to adjust the sensitivity from within the game
2) Enactment of Circulation way Digital
‡
Analog
‡
Negcon
‡
Digital
again.
3) When PS2 Console is locked as a certain mode, the MODE button is invalid,
and the MODE LED shows the existing mode
2. PROGRAM function (without memory)
1) Under the NEGCON mode, there is no PROGRAM function.
2) PROGRAM sourcing buttons include:
x,
●
,
■
,
▲
,
L1, L2, R1, R2.
3) The PROGRAMMABLE KEY include: up hand gear, down hand gear, left foot
pedal, right foot pedal, left hand paddle, right hand paddle..
4) PROGRAM
method:
A. Press and hold the START key for 3 seconds, the green LED
will be on.
B. Press the programmable key such as “left foot pedal”, the green LED will
be
fl
ashing.
C. Press the PROGRAM sourcing button such as “L1”, green LED will be off,
and the PROGRAM is over. Now “left foot pedal” act as the function of
“L1”.
5) PROGRAM
cancellation
method:
