Tracer SHB901BH, Инструкция по эксплуатации

Страница: 14 / 44

14
Instructions for use
EN
TRACER Shockwave
Wireless Headset
Note:
• This pairing is based on Windows Vista and Windows 7 operation system. Other
versions should be operated according to system hints;
• If the bluetooth version of the computer is lower than V2.1, the pairing „0000”
password will be required.
VI. Pair the Headset with Multiple Devices
This headset can set up connection with two bluetooth devices at the same time at
most, and one of the connections is for hands-free pro
fi le (hfp). For multiple devices
pairing and connection, please refer to the following procedures:
1. First pair the headset with the bluetooth cell phone (refer to the „pairing with
bluetooth 2 transmitter”).
2. Switch o ff the bluetooth transmitter.
3. Pair and connect the headset with bluetooth cell phone (refer to the „pairing with
bluetooth cell phone”).
4. Switch on the transmitter again, ant the transmitter will automatically initiate the
connection to the headset.
Note:
• A
ſt er the successful pairing with multiple devices, the pairing devices will
memorize each other. Unless the pairing information is deleted because of new
pairing, the multiple device connection can be established next time by making
the hand-free pro
fi le connection between the cell phone and the headset fi rst and
then start the transmitter.
• Cell phones which support both HSP and A2DP protocols can set up HSP and
A2DP connection with the headset with headset if it is started again.