Head light Tracer Head LED 3W IPX4
Instruction manual
EN
Please read and retain for future reference the following
carefully to ensure the satisfactory and safe operation of
the light.
Note:
• Before the first use, remove all packaging elements.
• Unwind and straighten the USB cable before use.
• Make sure that the USB cable has no visible damage.
• Make sure that the cable is not stretched over an open
flame or other heat source that may damage the cable
insulation.
• The cable must be positioned so as not to present a risk
of tripping or entanglement
• This product is not a toy. Make sure children are supervi
-
sed and do not play with the product
• This device is not intended for use by persons (including
young children) with reduced physical, sensory or men
-
tal abilities or without experience and knowledge, unless
they are supervised or instructed in the use of the device
by a person responsible for their safety.
1. Package includes:
Torch, USB cable, Instruction manual
2. Product description
Head light with 5 lights modes.
ON/OFF
USB Port
3. Use direction
3.1. Before using the product for the first time, we advise you
to check the battery level. When the headlamp is char
-
ging, the red indicator is on; when it is fully charged, the
green light is on.
3.2. If the battery level is below 100%, charge the searchli
-
ght. In order to do so, slowly and slightly pull the micro
USB cover to a side. Be careful, if you pull it too sharply
or hardly you will permanently take it out. Connect it with
the attached in the packaging USB cable and then to
a power source. When the LCD display shows 100%
charge, the searchlight is ready for use.
4. Instruction manual
4.1 Use the button
to switch the searchlight” ON, OFF or
to change the light modes.
4.2. Adjust the strap circumference to your head before you
start using it. Remember that the strap is elastic!
4.3. The first press of the ON button will start the LED white
light in the strong white light mode.
4.4. Subsequent single presses (with an interval of 5 se
-
conds) trigger the sequence of the next modes:
• white strong light
• white weak light
• white blinking light
• red light
• red blinking lighti
• Shutdown.
Safe use instruction
1. Do not cover the lamp with any objects.
2. Do not pull the power cable
3. Be careful with hot surfaces
4. Do not stare at the light source
5. Do not touch with wet hands
6. Do not throw it
7. The product is not a toy
8. Do not expose to high temperatures (built-in battery)
Parameters:
Micro USB voltage: DC 5V-1A
Battery capacity: 1200 mAh
Material: ABS
Product disposal:
1. Packaging components in the form of paper, cardboard
and similar materials should be transferred to waste paper
or thrown into waste containers intended for paper
2. Plastic elements such as polystyrene, films, granular fillers
and similar should be thrown into containers intended for
plastics
