4
GENERAL INSTRUCTIONS
Your Model 858 Trac-Vac is designed to mount to the drawbar and center link of your compact
tractor. It does not require the use of the lower arms of the 3-point hitch to mount.
Each unit requires a tractor specific mount kit that will need to be installed to the drawbar of
your tractor. Once the kit is installed the frame on the Model 858 bolts to the mount kit via two
1/2" x 1 1/4” hex bolts and locknuts included in the hardware package of the Model 858 Trac-
Vac.
Please refer to instructions in the mount kit in conjunction with this manual to install your Model
858 Trac-Vac.
Once installed be sure that the lower arms of the 3-point hitch are free to move through their full
range of motion as this is usually how the mid-mount deck achieves its movement up and down.
