TR TR89250, Руководство оператора

Страница: 7 / 12

VER.032818
© TR Industrial
7
OPERATIONS
SWITCHING ON AND OFF
1. The power switch has three settings: 0 (off), I (standby/cool
down), and II (on).
2. To turn the tool on, set the switch from 0 to I or from 0 to II. It
is normal that some smoke might be emitted after switching
on.
3. To turn the tool off, first set the switch from setting II to I
which allows the tool to cool down. Make sure the tool has
cooled down before switching to setting 0 to turn the tool off.
TEMPERATURE AND AIR FLOW SETTINGS
1. Set the power switch to setting I and the tool enters the
standby/cool down mode. In this mode, the temperature is
fixed at 120 °F, but you may adjust the air flow by using the
increase air flow button and decrease air flow button .
2. Set the power switch to setting II and the tool is fully
operational, you may:
• Increase and decrease the operating temperature in 20 °F
increments by using the increase temperature button
and decrease temperature button . The heating/cooling
indicator (1.2) will appear and continue flashing until the
temperature setting is reached.
• Adjust the air flow by using the increase air flow button
and decrease air flow button .
PRESET MODE SELECTION
1. Four presets are available for your most requently used
temperature and air flow settings.
2. To select a preset, set the power switch to setting II, and cycle
through the presets by using button .
3. To override and memorize a new preset, cycle to the desired
preset using the preset selection button .
Modify the temperature and/or air flow setting, and the preset
input indicator (1.1) will appear and begin flashing indicating
a change to the preset has been initiated. Press the memorize
preset button for about 2 seconds until the preset input
indicator (1.1) disappears. The new setting is now memorized
to the preset.
DESCRIPTION
LCD digital display
Memorize preset button
Preset selection button
Decrease temperature button
Increase temperature button
Increase air flow button
Decrease air flow button
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
LCD Digital Display
1.1 Preset input indicator
1.2 Heating/cooling indicator
1.3 Preset mode indicator
1.4 Temperature
1.5 Air flow
1.1
1.2
1.3
1.4
1.5
6
6
7
7
5
4
3
3
2