TR TR89250 Скачать руководство пользователя страница 4

VER.032818

© TR Industrial

4

•  ONLY USE THE ACCESSORIES 

recommended in the manual. Use 

of accessories that are not listed may cause injury.

•  KEEP TOOL AWAY FROM OIL AND GREASE AND AS DRY AS 

POSSIBLE. 

Always use a clean cloth when cleaning. Never use 

brake fluids, gasoline, petroleum-based products or any solvents 

to clean tool.

•  STAY ALERT AT ALL TIMES! 

Do not allow familiarity (gained 

from frequent use of your tool) to cause a careless mistake. 

ALWAYS REMEMBER that a careless fraction of a second is 

sufficient to inflict severe injury.

SPECIFIC SAFETY RULES

•  ALWAYS 

Keep in mind that behind walls, floors, ceilings, 

and other panels, thre could be flammable materials, which 

could be ignited from the heat of this tool while stripping 

paint. If something does catch fire, it could be behind the 

materials, which means you may not notice it, but it can cause 

considerable damage. Keep in mind that this gun can produce 

heat up to 1000° F or 538° C.

•  THIS HEAT GUN 

is not a hair dryer. Please do not attempt to use 

it as such.

•  ALWAYS 

shut down and disconnect the heat gun, and let it cool 

for 30 minutes before moving it or storing it. Make sure the heat 

gun is on a flat surface where the nozzle tip can point upwards, 

so that it can cool properly.

•  ALWAYS 

use high-quality paint stripping knives and scrapers to 

use this tool effectively.

•  DO NOT OBSTRUCT THE NOZZLE. 

Make sure the air intake and 

main nozzle are always unobstructed.

•  AIM. 

Always aim the gun directly at the work at hand, and away 

from other people and flammable materials.

•  DO NOT TOUCH 

the nozzle or allow it to touch other objects 

during use or within a short time of use as it becomes extremely 

hot.

•  DO NOT 

poke or push anything inside the nozzle.

•  KNOW 

your work environment well to avoid any unforeseen 

hazards.

•  DRY PAINT 

should be cleaned off the nozzle after use to make 

sure it doesn’t ignite.

•  SCRAPER BLADE 

should also be cleaned frequently during use 

so that it doesn’t ignite.

•  DO NOT 

combine the use of this heat gun with chemical 

strippers.

•  ONLY USE 

scrapers for scraping, do not attempt to use the 

attachments or other parts for scraping.

•  DO NOT 

attempt to use this for heating foods.

•  KEEP 

the nozzle far from the cord.

•  NEVER 

forget that this gun can ignite flammable materials, and 

always be aware of the environment and surrounding objects.

NOTES ABOUT THE HEAT GUN

1.  Make sure the tool is off and disconnected from power when 

it’s not being used.

2.  Clean the scraper often when in use as the residue build up 

can be flammable.

3.  Try using the heat gun with the nozzle at different distances 

from the object being worked on to find the right amount of 

distance.

4.  When stripping paint, there will be bits of paint around the 

work area, be sure to clean them up as you work.

5.  If you’re using the heat gun indoors, be sure to keep it away 

from curtains, upholstery, papers, and other flammable 

materials.

6.  This tool can do an excellent job if used properly, but it's 

recommended you practice on smaller projects first to gain 

the skill necessary to excel on bigger jobs.

NOTES ABOUT THE HEAT GUN

1.  It’s always best to do the work outdoors. If it’s not possible 

to do outdoors, be sure to keep the area ventilated. Keep 

windows open and make sure you have a fan blowing the air 

out.

2.  If there are any rugs, carpets, furniture, cooking utensils or 

air ducts, be sure to remove them.

3.  For safety reasons, be sure to wear protective clothing and 

place cloths on the ground to catch paint chips and peelings.

4.  Work areas should be well sealed away from the rest of the 

room, and be sure to only do one room at a time.

5.  Pregnant women and nursing mothers should not be present 

during the work due to potential health hazards.

6.  Wear a mask that has been approved by OSHA to prevent dust 

and fumes from entering.

7.  Do not leave the heat gun in one spot for too long as it can 

produce fumes, which might then be breathed in.

8.  Do not consume any food, drinks, tobacco or other substances 

in the work area.

9.  Make sure you wash your hands, arms, and face thoroughly 

before consuming anything.

Содержание TR89250













Отзывы: