Instructions for mounting / schematic
TR-Electronic GmbH 2011, All Rights Reserved
Printed in the Federal Republic of Germany
Page 36 of 39
TR - ECE - BA - DGB - 0081 - 05
02/14/2018
4.2.2 Type with
ø
25
H7…40H7 and optional parallel key / groove
Figure 8: Type with dowel pin and spring torque holder with
ø
25
H7…40H7
The minimal dowel pin length of 3 mm is the result of the safety distance from the
spring torque holder to the machine (1 mm) and at least 2 mm, the dowel pin must rise
into the spring torque holder.
Position the measuring system so that a minimum distance of 1 mm is kept between
spring torque holder and machine
. Depth of dowel pin (into groove) ≤ 6 mm.
Protect measuring system against slipping on the shaft by tighten the clamping ring
with the hexagon key.
Figure 9: Type with dowel pin and spring torque holder in assembled condition with
ø
25
H7…40H7
