TQC LD8100, Руководство пользователя, Страница: 13 / 24

13
The grounding cable (C) must be inserted into the black bus (I)
be on the bottom of the device. (near the battery compartment)
The other side of the earth cable is plugged into the supplied
crocodile clip (D). This crocodile clip must be connected. When
used on an untreated piece of the substrate
The bottom of the unit also houses the battery compartment (II)
and the headphone jack (III)
5.2 Other preparations
To get proper conductivity, it is important that you work with a wet sponge. You can use tap
water containing a small amount (drop per liter) detergent. This detergent reduces the surface
tension of the water. It is important that the surface remains wet during the measurement.
5.3 The operating button
The device is operated by a single button:
The button is located directly under the display, slightly
elevated and ‘clicks’ when pressed.
EN