12
triggered and the alarm sign displayed next to the
concerned parameter. If no limits are set here, the settings
in the
Setup
menu are used. Select
Back
and press OK to
return to the
Batch
menu and start logging.
Figure 4-5 Limits in batch
5. Place the rubber tip of the surface temperature sensor
against the surface at an angle of 90° (see figure 4-6), and
keep it in this position until the measured value remains
stable.
DO NOT USE EXCESSIVE FORCE!
A light contact with the surface is sufficient. Using force
does not increase the measuring speed or improve the
accuracy of the measurement, but it does wear and/or
damage the sensor tip. Do not drag the probe over the
surface.
6. Select
Log
to start logging. The screen with
measurements displays.
Figure 4-7 Measuring with manual logging
Содержание DC7000
Страница 1: ......
