TQC CurveX 3 Basic, Руководство пользователя

Страница: 10 / 16

10
The magnet surface probe
This probe can be placed on any ferrous steel object. The
sensor element is located exactly in the middle of the
probe.
•
Take the probe between your thumb and forefinger at
the metal cable support just above the magnet and
place the probe at the preferred location on the
object.
The clamp surface probe
Use the clamp to place this probe on any object. The
sensor element is located inside the jaw of the clamp,
insulated by a small piece of ceramic. There is some
friction on this part in order to align the sensor element
with the surface to ensure good contact.
•
Take the clamp between your thumb and forefinger.
Check which jaw has the sensor element and place
the probe at the preferred location on the object.
The maximum reach of the clamp is 20mm.
The clamp air probe
This fast-responding probe has its sensor element
inside the small steel protective tube.
•
Connect the probe to the object or conveyor belt
in the same way as specified for the clamp
surface probe.
The wire probe
This universal probe can be used for either air or surface
temperature measurements. The measuring element is an
open thermocouple that can be attached with adhesive
tape or by other mechanical means.