TQC Sheen GLOSSMETER GL0010 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 32

TQC Sheen GLOSSMETER GL0010 Скачать руководство пользователя страница 21

21 |

8 SCAN SETUP

You can change the scan settings for the device in the Scan Setup menu.

Note: It is possible to protect the Scan Setup menu with a password. If password protection is active, you
need to log in to change the scan settings. For more information on password protection, see section 3.1.

Figure 4-1 The Scan Setup menu with the Geometry option selected

The Scan Setup menu contains the following options:
•

Scan Limits

•

Geometry

•

Calibrate

These options are described below.

8.1 Scan Limits

You can set scan limits for measurements that need to fall within a certain range. Scan limits can be activated
and deactivated. The scan limits are inactive by default and the values are set to 0 (minimum) and 2,000
(maximum).

Figure 4-2 The Limits screen (scanning ranges)

Activate/deactivate scan limits

1.

Select Scan Setup in the Main Menu and press OK.

2.

Select Scan Limits and press OK. The scan angles, the scan limits, and their status display.

«
...
19
20
21
22
23
...
»

Содержание GLOSSMETER GL0010

































Отзывы:

Нет отзывов