Page 20
7. Maximum/Minimum Mode
A Maximum/Minimum function is provided on the
WP-87
. The
WP-87
stores maximum and minimum temperature separately for all active
channels when this function is started. The Maximum/Minimum data can
later be recalled on the display. The Maximum/Minimum data can also be
printed using the RS232 interface.
7.1 Starting and Stopping Maximum/Minimum Mode
To start recording Maximum/Minimum data, press the following sequence
of keys…
→
F3:
MAX
M
I
N
→
F4:Start
Once Maximum/Minimum mode has been started, a flashing “
m
” appears
on the display in normal measurement mode.
To stop recording Maximum/Minimum data, press the following sequence
of keys…
→
F3:
MAX
M
I
N
→
F4:Stop
The flashing “
m
” is now switched off.
Note :
When Maximum/Minimum recording is stopped, the current
Maximum/Minimum data is saved and will no longer be updated.
Maximum/Minimum data must be erased before changing the readout
units or the number of channels.
Maximum/Minimum mode is automatically stopped during calibration, to
ensure that genuine data is not over-written. The Maximum/Minimum
mode must be re-started by the user after calibration, if required.
