TPS MC-83 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 16

TPS MC-83 Скачать руководство пользователя страница 1

Congratulations !

You have purchased the latest in Handheld Relative Humidity and
Temperature instrumentation. We trust that your new

MC-83

Relative

Humidity-Temperature meter will give you many years of reliable service.

The

MC-83

is a breeze to operate. This manual has been designed to

help you get started, and also contains some handy tips. If at any stage
you require assistance, please contact either your local TPS
representative or the TPS factory in Brisbane.

The manual is divided into the following sections:

1.

Table of Contents

Each major section of the handbook is clearly listed. Sub-sections have
also been included to enable you to find the information you need at a
glance.

2.

Introduction

The introduction has a diagram and explanation of the display and
controls of the

MC-83

. It also contains a full listing of all of the items that

you should have received with your

MC-83

. Please take the time to read

this section, as it explains some of items that are mentioned in
subsequent sections.

3.

Main Section

The main section of the handbook provides full details of the

MC-83

,

including operating modes, troubleshooting, specifications, and warranty
terms.

MC-83 Humidity

& Temperature Meter

Version : 2.01
Date : 09/04/2003
Author : MS

1
2
3
...
»

Содержание MC-83

















Отзывы:

Нет отзывов