TPS JC-1000, Руководство пользователя, Страница: 6 / 11

----------------------------------------------------------------------------------------------------------------------
f) Do not use the scale in the rain or heavily polluted environment.
g) If the scale is not going to be used for some time, please clean it, remove the battery and
store it in dry conditions.
For problem “a” through “d”, please stop using the scale and send it back to your supplier for
repair or replacement of problem parts.
Calibration Method
Please do not attempt to calibrate the scale without standard weight
Step Operation Display Remarks
1 Press & Hold
[ZERO ]Key to power
on
00000 Input the password “*****”
2 Press[ZERO]Key SPEn Enter into setting state, and make sure the scale is
with non-load.
3
Press [
HOLD]
Key
Set
00000
It will display “00000” after 5 seconds.
4
Press [
HOLD]
Key to
add
Press [SWITCH] Key
to move the digit left
3000 Load the scale. The closer to full capacity the
better. For example, 3000kg
5 Press [ZERO] HOLd The scale will record the new calibration data.
Setup Functions in Sub-Menu
Function Operation Display Remarks
Sets buzzer Press [SWITCH] during
self-check sequence from
“99999” to “00000”
bEE
1
0: Disable
1: Enable
Press [HOLD] or
[SWITCH] to change.
HOLD function Press [ZERO]
Hod
1
0: Disable
1: Enable
Press [HOLD] or
[SWITCH] to change.
Zero Function Press [ZERO]
Stb
0
0: zeroing allowed when
unstable
1: zeroing not allowed