TPS JC-1000, Руководство пользователя, Страница: 4 / 11

----------------------------------------------------------------------------------------------------------------------
Model
Max. Capacity
(kg)
Measured Division Division Hi resolution
JC-600 600kg 0.2kg 0.1kg
JC-1000 1000kg 0.5kg 0.2 kg
JC-2000 2000kg 1kg 0.5 kg
JC-3000 3000kg 1kg 0.5 kg
JC-5000 5000kg 2kg 1 kg
JC-10t 10000kg 5kg 2 kg
JC-15t 15000kg 10kg 5 kg
JC-20t 20000kg 10kg 5 kg
JC-30t 30000kg 20kg 10 kg
1.
［HOLD］
: Press this key to keep the current weight and there is a LED indication lamp on
the bottom of the display window. Press this key again when the displaying weight flickers to
cancel the HOLD function.
2.
［
SWITCH
］
: Press this key to change between Measured Division and Hi resolution
Division.
3.
［ZERO］
: Press this key to set the current weight to zero.
General Scale Operation
1. Turn On the Scale
Press the power switch located under the displaying window of scale. The scale’s
maximum weighing capacity is first shown, and then the scale goes through a self-check
sequence. 5 seconds later, the scale will stabilize and be ready for operation. (Note: it is
recommended to allow scale 3~5 minutes of warm-up time before starting weighing
operation).
2. Zeroing
In general, the scale shows “0.0kg” or “0.00kg” after it is turned on. In case the
display is showing numerical value other than “0”, press [ZERO] on the keypad or the remote