TPS Aqua-pH Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 27

TPS Aqua-pH Скачать руководство пользователя страница 26

Page 25

11. Warranty

TPS Pty. Ltd. guarantees all instruments and sensors to be free from
defects in material and workmanship when subjected to normal use and
service. This guarantee is expressly limited to the servicing and/or
adjustment of an instrument returned to the Factory, or Authorised
Service Station, freight prepaid, within twelve (12) months from the date
of delivery, and to the repairing, replacing, or adjusting of parts which
upon inspection are found to be defective. Warranty period on sensors is
three (3) months.

There are no express or implied warranties which extend beyond the face
hereof, and TPS Pty. Ltd. is not liable for any incidental or consequential
damages arising from the use or misuse of this equipment, or from
interpretation of information derived from the equipment.

Shipping damage is not covered by this warranty.

Please note

A guarantee card is packed with the instrument or sensor. This card must
be completed at the time of purchase and the registration section
returned to TPS Pty. Ltd. within 7 days. No claims will be recognised
without the original guarantee card or other proof of purchase. This
warranty becomes invalid if modifications or repairs are attempted by
unauthorised persons, or the serial number is missing.

Procedure for service

If you feel that this equipment is in need of repair, please re-read the
manual. Sometimes, instruments are received for "repair" in perfect
working order. This can occur where batteries simply require replacement
or re-charging, or where the sensor simply requires cleaning or
replacement.

TPS Pty. Ltd. has a fine reputation for prompt and efficient service. In just
a few days, our factory service engineers and technicians will examine
and repair your equipment to your full satisfaction.

«
...
24
25
26
27
»

Содержание Aqua-pH




























Отзывы:

Нет отзывов