manualshive.com logo in svg

TPS 90-FL, Руководство пользователя, Страница: 33 / 68

Поделиться
Скачать
TPS 90-FL Скачать руководство пользователя страница 33

32

8.2 Failed Calibration

If calibration has failed, the GLP function will reset the date and time for the failed parameter to
zero. The 

90-FL

 still shows the results for the last successful calibration, as shown in the following

example of a failed pH calibration….

pH Asymmetry= 0.10pH      00/00/00 00:00
pH Un-Calibrated         F2:Back F4:Next

8.3 Printing GLP Information to the RS232 Port

The GLP information stored in the instrument’s memory can be sent to a printer or PC via the
RS232 port.

1.

 

Switch the meter on.

2.

 

Connect one end of the RS232 cable to the 

Charger

 socket of the 

90-FL

. The battery charger,

optional battery adaptor, or optional solar panel may be connected to the in-line socket on the
RS232 cable, if required.

3.

 

Connect the other end of the RS232 cable to an RS232 Printer, or to the COM1 or COM2 ports
of a PC.

4.

 

Send the GLP information to the RS232 port:

 

→

→

 F4:Setup 

→

→

 F2:GLP 

→

→

 F3:Print

The message “

Printing GLP Data

” is displayed while sending the data to the RS232 port.

5.

 

The GLP information is sent to the RS232 port in formatted ASCII text. For example…

90FL V6.0 S1234 @ 31/12/2000 12:00
Oxygen       Zero=       0.1%     @ 31/12/2000 12:00
Oxygen       Span=     100.0%     @ 31/12/2000 12:10
Conductivity Zero=      0.01uS    @ 31/12/2000 12:20
Conductivity k=         1.01      @ 31/12/2000 12:30
TDS          Zero=      0.01ppM   @ 31/12/2000 12:40
TDS          k=         1.01      @ 31/12/2000 12:50
pH           Asy=       0.10pH    @ 31/12/2000 13:20
pH           Slope=     99.0%     @ 31/12/2000 13:30
Temperature  Offset=     1.0oC    @ 31/12/2000 14:20
Temperature  Span=     100.0%     @ 31/12/2000 14:30
Ends

Содержание 90-FL





































































Отзывы:

Нет отзывов