TPM
207-D533-NN User Manual
43
(1.)
Bit5 (ID Request) of AL Control (0120h) is set to 1.
(2.)
The Station Alias set up by dip switch (low byte) and 4006h:02h (high byte) returns to AL Status Code
(0134h).
(3.)
To put bit5 (ID Loaded) of AL Status (0130h) from 0 to 1.
(4.)
When bit5 (ID Request) of control register is set from 1 to 0, the bit5 (ID Loaded) of AL Status register
(0x130) will change to 0.
(5.)
AL Status Code (0134h) is clear.
In the period of returning Station Alias, if an alarm which is defined in the AL status code occurs, AL status
code of the alarm is returned. When the alarm is cleared, Station Alias will return again.
AL Control Reg 0x0120.5
(ID Request)
AL Status Reg 0x0130.5
(ID Loaded)
AL Status Code 0x0134
Station Alias
Station Alias is requested by the
request of AL Control
AL Status Code is cleared without
the request of AL Control.
AL Control Reg 0x0120.4
(Error Ind Ack)
AL Control Reg 0x0120.5
(ID Request)
AL Status Reg 0x0130.4
(Error Ind)
AL Status Reg 0x0130.5
(ID Load)
AL Status Code
Reg 0x134
Station Alias
AL Status code of alarm
Station Alias
AL status code of alarm is returned if a
alarm which is defined in the AL status
code occurs
Station Alias will be returned if the alarm
is cleared
