MEASUREMENTS - Flue Gas (continued)
Connect the Gas Sampling Flue Probe Tubing complete to the In-Line Pump Protection
Filter (see below) and the 'K' Type Thermocouple Plug from the Flue Probe into
Thermocouple (T1) Socket. The GK11M ambient air temperature probe is connected to
the (T2) socket.
WARNING
: - Ensure the 'K' type thermocouple probes are inserted into the sockets
correctly (see page 7). The plugs are polarity marked and forcing the plug into the
socket the wrong way may result in damage to the instrument.
In-line Filter
Assembly
Ambient Air
Connection (T2)
Flue Probe
Tubing
GK11M Probe
Thermocouple
Connection from
Flue Probe
Pump Protection Filter
Press
the center Blue Soft Key (Start) and the pump
will start. The following screen will display:-
Press
the Left Blue Soft Key to send the Displayed
Readings Directly to the Optional A740 IR Printer
Press
the Right Blue Soft Key to Hold the desired
readings on the screen giving you the option to Save
or Send them to Memory, IR Printer or PC.
Press
the Centre Blue Soft Key to Stop the Pump
Running. The Pump will only stop running if the CO
level is below 10ppm otherwise this option is disabled.
14
www.
GlobalTestSupply
.com
Find Quality Products Online at:
