2
IMPORTANT INSTRUCTIONS
1.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical
shock, and injury to persons, including the following:
2. Read all instructions before using this heater.
3. CAUTION:
High temperatures. Keep cords and all other combustible material, such as furniture, papers, clothes
and curtains away from the heater. For safe and efficient operation, keep an open space around heater of three feet in
front and 12 inches at ends and rear.
4.
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left
operating and unattended.
5.
Do not operate any heater after it malfunctions, has been dropped or damaged in any manner. Return heater to
authorized service facility for examination, electrical or mechanical adjustment, or repair.
6. Do not use outdoors.
7. To disconnect heater, turn controls to off, and turn off power to heater circuit at main disconnect panel (or operate
internal disconnect switch if provided).
8. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric chock or
fire, or damage the heater.
9. To prevent a possible fire, do not block air intakes or exhaust in any manner.
10.
A heater has hot and arcing or sparking parts inside.
WARNING:
Do not use it in area where gasoline, paint, or
flammable liquids are used or stored.
11.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
12.
This heater may include an audible or visual alarm to warn that parts of the heater are getting excessively, hot. If the
alarm sounds (or illuminates), immediately turn the heater off and inspect for any objects on or adjacent to the heater
that may have blocked the airflow or otherwise caused high temperatures to have occurred.
DO NOT OPERATE THE
HEATER WITH THE ALARM SOUNDING (OR ILLUMINATING).
13. SAVE THESE INSTRUCTIONS
SWITCH LOCKOUT
For switch lockout hasp
or padlock thru bracket
as shown. Note: Front
grille must remain off
during lockout.
Form 9821
ECO 1-7472
REV. 10-19-18
