Appendix A: CALIBRATION & ACCESSORIES
It is recommended that the instrument be calibrated every 12 months. Please
consult Test Products International for further details.
The following are consumable parts for the instrument:
In-Line Filter Element (pkg of 5)
User Replaceable
A794F
Mini Pump Protection Filter Assem. User Replaceable
A763
**Carbon Monoxide Sensor
User / Factory Replaceable
A792
**Sensor replacement requires calibration gas.
The following are accessories for the instrument:
Flue Probe
Standard
A769
Exhaust Extension
Standard
A785
In-Line Filter Complete
Standard
A794
In-Line Filter Element (pkg of 5)
Optional
A794F
Mini Pump Protection Filter Assem. Standard
A763
Rubber Boot
Standard
A765
Infrared Printer
Optional
A740
Soft Carrying Case
Standard
A787
Exhaust Spigot
Standard
A764
Appendix B: GUARANTEE
Your TPI 706 Carbon Monoxide Analyzer is guaranteed free from defects in
materials and workmanship for 3 Years from the date of purchase. This guar-
antee does not affect your statuary rights. For additional information please
refer to the included warranty card or contact TPI at 800-368-5719.
To obtain warranty performance or maintenance on your analyzer: - Include
with the product your name, address, phone number, written description of
the problem and proof of purchase date. Carefully package and return to:
TPI / Attn. Repair
9615 SW Allen Blvd. Suite 104
Beaverton, OR 97005
H. Recalling Saved Data
1. Press the Recall button once.
2. The display will show “Stor” and “Cal”. Use the Arrow buttons
to select the desired function.
Stor -
Selecting “Stor” allows you to display the information in a
memory location.
1. Press the Recall button once. The display will show “Stor” and
“Cal”. Using the Arrow buttons select “Stor” by making it blink.
Press the Scroll/Enter button.
2. “Addr” will be displayed and a number from 0 to 49 will
flash.
3. Using the up and down arrows, select the memory location of
the readings you want to display.
4. Press the Scroll/Enter key once. The 706 will display the date
and time screen showing when that reading was stored.
5. Use the up and down arrows to scroll through the CO and Peak
readings that were saved.
6. Press the Scroll/Enter button and “End” will be displayed and
“Yes” will flash. Press the Scroll/Enter button if you are finished
recalling data or use the Arrow buttons to select No to recall
data from other locations.
CAL -
Selecting “CAL” allows you to display the last date of cali-
bration.
1. Press the Recall button once. The display will show “Stor” and
“Cal”. Using the Arrow buttons select “Stor” by making it blink.
Press the Scroll/Enter button.
2. “CAL” will blink and the last calibration date will be displayed in
DD/MM.YYYY format.
3. Press the Scroll/Enter button, “End” will be display and YES will
blink. Press the Scroll/Enter button to return to normal opera
tion.
I. Displaying Peak CO Measurement
1. Press the Scroll/Enter button, “P-r” and the peak CO reading
measured since power on will be displayed.
2. Press and hold the Down arrow button to zero the peak value.
3. Press the Scroll/Enter button to return to normal operation.
w
w
w
.
G
lo
ba
lT
es
tS
up
pl
y
.c
om
Fi
nd
Q
ua
lit
y
Pr
od
uc
ts
O
nl
in
e
at
:
sa
le
s@
G
lo
ba
lT
es
tS
up
pl
y.
co
m
