background image

20

21

4.

Set the rotary switch to the 

function.

5.

Press the 

Range/Diode/Continuity

button

so  that 

shows on the LCD.

6.

Connect the black test lead to the banded 
end of the diode and the red test lead to 
the non-banded end of the diode.  

7.

Reading on the display should be between 
0.3 and 0.8 volts.

8.

Reverse test lead connections in 6 above.

9.

Reading on the display should be OFL
(Overload).

NOTE:  If diode reads 0 in both directions, diode is short-
ed.  If diode reads OFL in both directions, diode is open.

g.

CONTINUITY BUZZER

WARNING!
Do not attempt to make continuity measurements 
with circuit energized. 

Instrument set-up:

FUNCTION

BLACK RED 
TEST LEAD

TEST LEAD

COM

V

Measurement Procedure:

1.

Disconnect power to the circuit to be measured.

2.

Plug the black test lead into the 

COM 

input jack.

Instrument set-up:

FUNCTION BLACK RED 

MINIMUM

MAXIMUM

TEST LEAD

TEST LEAD

READING

READING

COM

V

0.1

32.6M

Measurement Procedure:

1.

Disconnect power to the circuit to be measured.

2.

Plug the black test lead into the 

COM 

input jack.

3.

Plug the red test lead into the 

V

input jack.

4.

Set the rotary switch on the 163 to the 

function.

5.

Connect the test leads to the circuit to be measured.

6.

Read the resistance value on the 163.

f.

MEASURING DIODES

CAUTION!
Do not attempt to make diode measurements with
circuit energized.  The only way to accurately test
a diode is to remove it completely from the circuit
before attempting to measure it. 

Instrument set-up:

FUNCTION

BLACK RED 

MINIMUM

MAXIMUM

TEST LEAD

TEST LEAD

READING

READING

COM

V

0.001V

2.000V

Measurement Procedure:

1.

Disconnect power to the circuit to be measured.

2.

Plug the black test lead into the 

COM 

input jack.

3.

Plug the red test lead into the 

V

input jack.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание 163

























Отзывы: