TPG BizPhone Cordless W60P IP DECT Phone User Guide
P a g e
|
21
Two Calls on Hold
If two calls are placed on hold on the handset, press the
Resume
soft key to resume the current call. Press , or
the
Swap
soft key to swap between two calls.
Note:
When the call on the handset is placed on hold, placing the handset in the charging cradle will not end the call.
Do Not Disturb (DND)
You can use DND to reject incoming calls automatically on the phone. All calls you receive while DND is enabled are
logged to your missed calls list.
To activate DND on your phone:
1.
Press
to enter the main menu.
2.
Select
Call Features
->
Do Not Disturb
.
The LCD screen displays the incoming lines currently assigned to the handset. The default incoming line is
highlighted and followed by a left arrow.
3.
Press or to select
Enabled
from the
Status
field.
4.
Press the
Save
soft key to accept the change.
The
icon on the idle screen indicates the DND mode is activated. The handset will reject all incoming calls to this
line, and the LCD screen displays the missed call icon
followed by the number of missed calls.
Note:
Do Not Disturb is local to the phone, and may be overridden by the admin settings. For more information,
contact your system administrator.
Call Forward
You can configure your phone to forward incoming calls to another party through Call Forwarding.
There are 3 types of Call Forwarding:
Always Forward: Incoming calls are immediately forwarded.
Busy Forward: Incoming calls are immediately forwarded if the phone is busy.
No Answer Forward: Incoming calls are forwarded if not answered after a period of time.
To enable Call Forward on your phone:
1.
Press
to enter the main menu.
2.
Select
Call Features
->
Do Not Disturb
.
The LCD screen displays the incoming lines currently assigned to the handset. The default incoming line is
highlighted and followed by a left arrow.
3.
Press or to highlight the desired forwarding type, and press the
OK
soft key.
4.
Press or to select
Enabled
from the
Status
field.
5.
Enter the destination number you want to forward incoming calls to in the
Target
field.