14
4
.
Router connection instructions
Step one:
Connect the router power adapter and confirm that the
power indicator at the front of the panel is on.
Step two:
If the PC is connected to the network via the Ethernet
port, disconnect the Cable and connect it to the router’s WAN
port. Connect the LAN port of the router to the PC through the
supplied network cable, as shown in the figure.
Step three:
In the PC’s network connection Settings in a Windows
system, select “Local connection” to connect the router, and
change the connection of the TCP/IP Settings to automatically
obtain an IP address and DNS server address.
Note:
Use the router as is, DO NOT modify the router’s settings.
DO NOT restore the factory default settings. To optimize the
user experience, it is recommended to place the router in an
open location without obstacles, with a 90-degree antenna. Avoid
putting the router under a desk, behind a computer case, or in
any other enclosure environment.
HMD, plug in the DCIN power plug and the HDMI plug to the
corresponding port on the PC transmitter (the USB plug is not
required to be attached).
Step three:Connecting the power
Connect back the power supply to the VIVE streaming box.
LAN Port
WAN Port
