6
www.tpcdental.com
5.
Remove the PMU side cover. To remove it, pull on the lower lip to detach its magnetic
connection. Place it out of the way so it does not get damaged. This side cover will
remain detached until the end of the installation.
6.
Remove the plastic covers on the top of the PMU box Figure 6.1. Install the light post as
shown in the middle hole on the PMU side box Figure 6.2. Secure in place by tightening
the 4mm Allen set screw inside the PMU box Figure 6.3.
Figure 6.1
Figure 6.2
Figure 6.3