7 8
Chapter 2 Installation and Operation
2.
1
Installation
TP UP-PH portable thermal printer has an outline as shown
figure 2-1
：
Battery installation
：
put the battery into the battery house in
the bottom of the printer. Please notice the polarity of the
battery fitting to the electrode in the battery house. When heard
a sound of “peng” the battery has installed and locked into the
house. For taking out the battery push the release bar(see figure
2-2) to the battery.
Figure 2-1 TP UP-PH outline
2.2 Power Connection
A rechargeable battery is packed with TP UP-PH printer. It
can be installed and locked on the bottom of the printer. Slow
charging is used by a DC12V/600mA adaptor packed. When the
plug of the adaptor is inserted into the DC jack on the bottom
of the printer, trickle charging started. Full charging need 14
hours. Fast charging need take off the battery and put it on the
optional quick charger CX-101. Full charging need only 4
hours.
Figure 2-2 Battery installation
2.3 Loading Paper
TP UP-PH portable thermal printer provides a method of
easy paper loading:
Figure 2-3 Loading paper
(1) Open the cover of the printer;
Holder
ON(power on)
IrDAwindo
outlet
LF(line feed)
cover
Release Bar
Electrode
DC Jack
Serial P
ort
B a t t e r y H o u s e
