９
adapter is pull out from the outlet
2. Plug the power cable into the printer’s power socket as shown.
Figure 1-14 Connecting power to the printer
3. Plug the power cord of the adapter into the AC electrical outlet.
F
Note: If you want to remove the cable, power-off the power supply
adaptor or unplug the power cord from the electrical outlet, then
remove cable by grasping the connector firmly at the arrow mark
and pulling straight out.
Loading Paper Roll
TP POS58
Ⅲ
use thermal paper roll of 57.5mm in width.
Paper Specification
Model: TF50KS-E (Japan Paper Co., Ltd.)
AF50KS-E (JUJO THERMAL)
Paper roll : Width --- 57.5
±
0.5mm
Outside Diameter ---
φ
50mm (Max)
Inside Diameter ---
φ
13mm (Min)
Thickness (max.): --- 65 µm
(Auto-cutter version)
--- 80µm (Manual cutter version)
CAUTION:
１０
The thermal paper roll used should have inner paper cone. Otherwise, the whole paper
rolls may be not heavy enough to sit on its position and pull to the printing part, resulting
paper jam.
Installing the Paper Roll
TP POS58
Ⅲ
thermal line printer has easy loading design, the steps of
loading paper rolls is as follows:
1.
Lifting up the Open Lever on the upper cover and then open the
cover, see Figure 1-15.
2.
Insert the paper roll, pull out a small amount of paper as shown in
Figure 1-16.
3.
Close the cover. The paper end is should be come our of the paper-
out slot of the printer.
Figure 1-15 Open the upper cover Figure 1-16 Load the paper roll
