TP-Link VIGI NVR1008 Скачать руководство пользователя страница 87

Страница: 87 / 150

Chapter 5

Playback

3. The recording files of events are listed on the right panel. Double click a recording in the list to play

it.

For more playback operations, refer to

In the Playback module, you can use the icons and buttons in the toolbar and on the right panel to
adjust the display, edit and back up the recordings.

Note:

The operations are not available in Instant Playback.

5. 5. 1

Basic Playback Operations

The following icons are supported when playing recordings:

Select from the drop-down list to change the playing speed.

Jump forward/backward by 30 seconds.

(Available when the recording is paused) Play the recordings by frames.

Click and slide to adjust the volume.

(Available in Normal Playback and Event Playback) Lock/unlock the

recordings. Once locked, the recording cannot not be overridden.

Содержание VIGI NVR1008























































































































































Результаты поиска

Содержание VIGI NVR1008

Отзывы:

Похожие инструкции для VIGI NVR1008

Бренды по названию

Популярные бренды

TP-Link VIGI NVR1008, Руководство пользователя

Результаты поиска

Содержание VIGI NVR1008

Отзывы:

Похожие инструкции для VIGI NVR1008

Бренды по названию

Популярные бренды