More Management Methods
1. Download the
VIGI Security Manager
on your
computer at
https://www.tp-link.com/support/download/vigi-s
ecurity-manager/
.
2. Install the
VIGI Security Manager
and open it.
3. Cameras on the same network as your computer
can be automatically discovered. Go to
Settings
>
Discovered Devices
, click
+ Add
to activate your
discovered cameras by setting passwords, and
follow the instructions to add your cameras.
Method 1: Via the VIGI Security Manager
(Windows only)
You can also access and manage your cameras via any of the methods below.
View live video and modify camera settings on
your computer.
Method 3: Via a Web Browser
View live video and modify camera settings via a
web browser.
1. Find the camera's IP address on your router’s client
page.
2. On your local computer, open a web browser and enter
https://camera's IP address
(https://192.168.0.60 by
default).
3. Select your Country/Region and Time Zone.
4. Set a password to activate the camera.
Done. You can view the live video on the Preview page, and
go to the Settings page to change camera settings.
Method 2: Via the TP-Link VIGI App
Remotely view live video, manage cameras, and
get instant alerts.
1. Download and install the
TP-Link VIGI
app.
2. Open the
TP-Link VIGI
app and log in with your
TP-Link ID. If you don’t have an account, sign up first.
3. Tap the
+
button on the top right and follow the app
instructions to activate and add your cameras.
or
2
Use Your Camera with an NVR
VIGI NVR
Monitor
Network Device
(e.g., Switch or Router)
The camera works with an NVR for easier batch access and management.
*Here we use a VIGI NVR as an example.
Frequently Asked Questions (FAQ)
Q1: What can I do if no cameras are discovered?
• Refresh to discover your camera again.
• Make sure the camera is powered on.
• Make sure your camera and NVR/computer are in the same subnet. If not, use the
VIGI
Security Manager
to set camera’s network parameters.
• Try to add your cameras manually.
• For other NVR brands, make sure you have activated the camera by setting a password
via the
VIGI Security Manager
or
TP-Link VIGI
app.
Q2: How do I reset the camera?
• Rotate the sphere and unfasten the two fixed screws to remove the cover. Long press the
reset button until the Status LED starts blink red quickly,
Q3: What should I do if I forgot the password of the camera?
• You can check the password of the camera via
VIGI NVR
or
VIGI Security Manager
.
For more details, refer to NVR and Security Manager’s User Guides.
• You can reset the camera and activate it again on the VIGI app. During the activation
process, you can set a new password.
Q4: What should I do if the SD card is not working properly?
• Make sure you are using a micro SD card.
•
Unplug the SD card and insert it again. Make sure you have inserted the SD card
correctly.
• It’s recommended to use a Class 10 micro SD card or higher, with storage from 8 GB to
256 GB.
• Make sure you have initialized the microSD card in
TP-Link VIGI
app.
• If the problem still persists, contact our technical support.
• Do not use any other chargers than those recommended.
• Do not use damaged charger or USB cable to charge the device.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• The power adapter must be used indoors. Make sure that the temperature of the power adapter is
within 0-40°C.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and
(EU)2015/863. The original EU Declaration of Conformity may be found at
https://www.tp-link.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment
(Safety) Regulations 2016.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/uk/ukca
Network Camera
Network Camera
Step 2. Power On the Cameras
Power on your cameras with the PoE power supply or an external power
supply.
Caution:
The camera’s standard power supply is 12V DC (14W) or PoE
(802.3af/at). The power source should comply with Power Source Class 2 (
PS2) or Limited Power Source (LPS) of IEC 62368-1.
Step 1. Connect the Hardware
Connect your cameras to the same network as your NVR (as
shown above).
Step 3. Add Cameras with the NVR
Before you start, make sure the NVR is working properly.
1. Right click on the Live View screen and click
Add Camera
.
2. Select your camera and click
+
to add your camera directly. If you have disabled
Plug and Play on your NVR, create a password or use a preset password for your
camera.
Note: If you can’t find your camera, refer to FAQ-Q1.
Done!
You can now view live video and manage cameras.
Using your cameras with other NVR brands:
Step 1:
Power on your cameras and connect them to the network.
Step 2:
Activate the camera using the
VIGI Security Manager
or
TP-Link VIGI
app (refer to the next section).
Step 3:
Refer to the NVR’s User Manual to add cameras.
For more questions, please refer to
https://www.tp-link.com/support/faq/2850/
For technical support and other information, please visit
https://www.tp-link.com/support
, or simply scan the QR code.
