TL-WPA281/TL-WPA271
Wireless N Powerline Extender
25
Click the
Delete All
button to delete all entries
Click the
Next
button to go to the next page and click the
Previous
button to return to the previous page.
For example:
If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE is able to
access the device, while all other wireless stations cannot access the device, you should configure the
Wireless MAC Address Filtering
list by following these steps:
1. Click
the
Enable
button to enable this function.
2. Select the radio button:
Deny the stations not specified by any enabled entries in the list to
access
for
Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click
the
Add New...
button and enter the MAC address 00-0A-EB-00-07-BE in the
MAC Address
field, enter Wireless Station A in the
Description
field and select
Enabled
in the
Status
pull-down
list. Click the
Save
button.
The filtering rules that configured should be similar to the following list:
)
Note:
If you enable the function and select
Deny the stations not specified by any enabled entries in the
list to access
for
Filtering Rules
but there isn’t any enabled entry in the list, thus, no wireless stations
can access the device.
3.5.4 Wireless Advanced
Selecting
Wireless
>
Wireless Advanced
will allow you to do some advanced settings for the device in
the following screen shown in Figure 3-18. As the configuration for each operation mode is almost the
same, we take Access Point mode for example here.
Figure 3-18 Wireless Advanced
