TL-WN422G
High-Gain Wireless USB Adapter User Guide
20
¾
Wireless Mode when Starting an Ad Hoc Network
: Specifies 2.4 GHz 54/11 Mbps to
the channel that the Wireless Adapter uses.
e adapter finds no other ad
automatically. The Adapter must match the wireless mode and channel of the clients it
Mode
: Select which mode the Adapter uses to authenticate to an
Auto
-
Automatic causes the adapter to attempt authentication using shared, but
dless of its
t) networks, click
Preferred APs…
to specify four access points
with which it associates.
start an Ad Hoc network if no matching network name is found after scanning all available
modes. This mode also allows the selection of
The channels available depend on the regulatory domain. If th
hoc adapters, the channel that the adapter starts the ad hoc network with will be selected
associates.
¾
802.11 Authentication
access point:
•
switches it to open authentication if shared fails.
•
Open
-
Open System enables an adapter to attempt authentication regar
WEP settings. It will only associate with the access point if the WEP keys on both the
adapter and the access point match.
•
Shared
-
Shared-key only allows the adapter to associate with access points that have
the same WEP key.
For infrastructure (access poin
at most to the client adapter that attempts to be associated to the access points. The four
access points have different priorities; the frontal has the higher priority.
Figure 3-7
Figure 3-2).
2. Select the profile name in the Profiles List.
3.2.2 Remove a profile
1. Go to the Profile Management tab (shown in
