TL-WN353GD
54M Wireless PCI Adapter User Guide
17
Figure 3-7
Step 1:
Select the “Open System” as the Network Authentication.
Step 2:
Select the “WEP” as Data encryption.
Step 3:
Select the type for the password and you can select the ASCII or PASSPHRASE. For
ASCII, you can enter any characters in the keyboard; For PASSPHRASE, you can enter
the characters from 0 to 9.
Step 4:
Select “64 Bits” as the Key Length, then enter “0123456789” as the password value.
Step 5:
Select the Key index “1”, and click the
OK
to save the configuration.
2. Shared
Key
authentication
When you select the
Shared Key
as the authentication, the only available data encryption is
WEP.
)
Note:
The configuration for Shared Key authentication and Open System are similar, you can refer to
the Open System authentication to configure it.
3. WPA-PSK
authentication
When you select the
WPA-PSK
as the authentication, the available data encryptions are TKIP
and AES. Please select the one according your need.
For example:
If the wireless network takes WPA-PSK authentication, TKIP data encryption, the
network key is 0123456789. You can configure it for adapter as follows.
