TL-WDR3500
N600 Wireless Dual Band Router
- 101 -
2. Enter the MAC Address or IP Address.
3. Click the
Find
button in the page as shown in Figure 4-106.
Figure 4-106 Find IP & MAC Binding Entry
Click the
Enable All
button to make all entries enabled.
Click the
Delete All
button to delete all entries.
4.18.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries (shown in Figure 4-107).
Figure 4-107 ARP List
1.
MAC Address
-
The MAC address of the controlled computer in the LAN.
2.
IP Address
-
The assigned IP address of the controlled computer in the LAN.
3.
Status
-
Indicates whether or not the MAC and IP addresses are bound.
4.
Configure
-
Load or delete an item.
Load
-
Load the item to the IP & MAC Binding list.
Delete
-
Delete the item.
Click the
Bind All
button to bind all the current items, available after enable.
Click the
Load All
button to load all items to the IP & MAC Binding list.
Click the
Refresh
button to refresh all items.
