2
Locate a suitable mounting site for your CPE. For choosing the best location,
select an elevated location where trees, buildings and large steel structures will
not obstruct the antenna signals and which offers maximum line-of-sight
propagation with the users.
Connect one end of an Ethernet cable to the POE port of the provided Power
Injector and the other end of the Ethernet cable to the LAN port of the CPE.
Then, connect the LAN port of
the Power Injector to a PC using
another Ethernet cable. Finally,
plug the provided power adapter
into the DC jack on the Power
Injector, and the other end to a
standard electrical wall socket.
Note
Please use only wired network connections to configure the AP.
Adjust the direction of your CPE for the best signal. Place the straps through
the slots on the back of the CPE and then around the pole. Tighten the straps.
Connecting the Device
2