12
Note
T1. How do I restore my AP’s configuration to its factory default settings?
T2. What can I do if I forget my password?
1) Restore the AP’s configuration to its factory default settings. If you don’t
know
how to do that, please refer to previous section
T1
;
2) Use the default user name and password:
admin
,
admin
;
3) Try to reconfigure your AP by following the instructions of this QIG.
T3. What can I do if I cannot access the web-based configuration page?
You should first configure your computer’s IP Address.
Please follow the steps below to finish your PC configuration.
¾
For Windows 7 OS
With the AP powered on, press and
hold the
Reset
button for about 8
seconds before releasing it.
Once the AP is reset, the current configuration settings will be lost and you
will need to reconfigure the AP.
Appendix 2: Troubleshooting
Hold it in for about 8 seconds
Go to
Start > Settings > Control
Panel
, and then you will see the
following page.
Click
View network
status and tasks