TP-Link TL-WA7110ND, Руководство пользователя

Страница: 27 / 50

TL-WA7110ND 150Mbps High Power Wireless Access Point User Guide

Wireless Security Mode - This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as your AP's security
type.
 Wireless Password - If the AP your Device is going to connect needs password, you need
to fill the password in this blank.
 Static IP - In this type, you should manually fill in the IP address , Subnet Mask , Default
Gateway , and DNS IP address, which are specified by your ISP.
1) If you choose Static IP in Figure 3-8 and then click Next , Figure 3-11 will appear.
Figure 3-11 Static IP

IP Address - This is WAN IP address as seen by external users on the Internet (including
your ISP). Enter the IP address into the field.
 Subnet Mask - It is used for the WAN IP address, which is usually 255.255.255.0.
 Default Gateway - Enter the default gateway in the blank if required.
 Primary DNS - Enter the DNS IP address in the blank if required.
 Secondary DNS - If your WISP provides another DNS IP address, enter it in this field.

Note:
The IP parameters should have been provided by your WISP.
2) After you have entered the above necessary parameters and then click Next , the wireless
setting page as shown in Figure 3-10 will then appear.
2. Click Survey in Figure 3-10 to scan the wireless networks, then the AP List page will pop up
as shown in , choose the target one, click Connect . You will then return to the previous page.
If the AP your Device is going to connect needs password, you need to fill the password.
Click
Next .
16