TP-Link TL-SL5428, Руководство по установке

Страница: 12 / 64

A
BOUT THE
TL-SL5428
1-2
Switch Architecture
The TL-SL5428 switch employs a wire-speed, non-blocking switching
fabric. This permits simultaneous wire-speed transport of multiple packets
at low latency on all ports. The switch also features full-duplex capability
on all ports, which effectively doubles the bandwidth of each connection.
This switch uses store-and-forward switching to ensure maximum data
integrity. With store-and-forward switching, the entire packet must be
received into a buffer and checked for validity before being forwarded.
This prevents errors from being propagated throughout the network.
Network Management Options
The TL-SL5428 switch contains a comprehensive array of LEDs for
“at-a-glance” monitoring of network and port status. It also includes a
management agent that allows you to configure or monitor the switch
using its embedded management software, or via SNMP applications. To
manage the switch, you can make a direct connection to the RS-232
console port (out-of-band), or you can manage the switch through a
network connection (in-band) using Telnet, the on-board Web agent, or
SNMP-based network management software.
For a detailed description of the advanced features, refer to the Management
Guide .
Description of Hardware
10/100BASE-T Ports
The TL-SL5428 contains 24 10/100BASE-TX RJ-45 ports that operate at
10 Mbps or 100 Mbps, half or full duplex. The ports all support automatic
MDI/MDI-X operation, so you can use straight-through cables for all
network connections to PCs or servers, or to other switches or hubs. (See
“10BASE-T/100BASE-TX Pin Assignments” on page B-2.)