TP-Link TL-SL2210WEB, Руководство пользователя

Страница: 52 / 64

45
Gigabit Uplink Web Smart Switch
Clean Up
¾
: Clean up all members of the VLAN.
Submit
¾
: Submit to buildup a VLAN with the selected members.
Note:
VID of the VLAN must be unique and within the range of 1 to 4094.
■
At least two port members should be included to add a VLAN group. (If the page is
■
submitted with 0 VLAN member, it indicates to delete the VLAN.1
If any Trunk has been set, the Trunk can be configured as a VLAN member and
■
member ports of the Trunk cannot be configured (see Port 1 and 2 in Figure 6-40 for
example1.
If the port is connected to a device that doesn’t support IEEE802.1Q (e.g. HUB and
■
some network adapter1, value of the Egress Frame field should be set to “Drop Tag”.
For the first time the Port VLAN mode is set, a default VLAN, which is indexed as NO.
■
1 and contains all switch ports, will be built up.
The ports haven’t been assigned to any VLAN manually cannot communicate with
■
each other or other VLAN. That’s different from the Port VLAN.
The number of Port VLAN that can be set depends on the switch type. See the
■
Appendix C for details.
MTU VLAN Setting 511121C
This page, which is designed to configure the uplink port, is displayed when the switch
is in MTU VLAN mode.
MTU VLAN Setting Figure 6-42
Note:
The uplink port will buildup several VLANs with each of the other ports. Each VLAN
■
contains two ports, the uplink port and one of the other ports in the switch, so the
uplink port can communicate with any other port but other ports can’t communicate
with each other.
First time the MTU VLAN mode is set, it set port 1 to be the uplink port by default.
■
Port Trunking 5111C
This page contains the following fields:
Web Management