TP-Link TL-SL2210WEB, Руководство пользователя

Страница: 13 / 64

06
Gigabit Uplink Web Smart Switch
Site Requirements
■
To ensure normal eperation and long service life of the device, please install it in an
environment that meets the requirements described in the following subsection.
Temperature/Humidity
ȭ
ȭ
1 3 5 7 2 4 6 8 GIGA SFP
10/100Mbps 10/100/1000Mbps 1000Mbps
1 2 3 4 5 6 7 8
TL-SL2210WEB
RESET
8+2G Web-Smart Switch
Power
100M
Link
Act
System 1000M
GIGA
Link/Act
Link/Act
R
Please keep a proper temperature and humidity in the equipment room. Too high/low
humidity may lead to bad insulation, electricity leakage, mechanical property changes
and corrosions. Too high temperature may accelerate aging of the insulation materials
and can thus significantly shorten the service life of the device. For normal temperature
and humidity of the device, please check the following table.
Environment Temperature Humidity
Operating 0
℃
~ 40
℃
10% ~ 90%RH Non-condensing
Storage -40
℃
~ 70
℃
5% ~ 90%RH Non-condensing
Clearness
1 3 5 7 2 4 6 8 GIGA SFP
10/100Mbps 10/100/1000Mbps 1000Mbps
1 2 3 4 5 6 7 8
TL-SL2210WEB
RESET
8+2G Web-Smart Switch
Power
100M
Link
Act
System 1000M
GIGA
Link/Act
Link/Act
R
The dust accumulated on the Switch can be absorbed by static electricity and result
in poor contact of metal contact points. Some measures have been taken for the
device to prevent static electricity, but too strong static electricity can cause deadly
damage to the electronic elements on the internal circuit board. To avoid the effect of
static electricity on the operation of the Switch, please attach much importance to the
following items:
Dust the device regularly, and keep the indoor air clean.
■
Keep the device well grounded and ensure static electricity has been transferred.
■
Electromagnetic Interference
1 3
5 7
2 4 6 8 GIGA SFP
10/100Mbps 10/100/1000Mbps 1000Mbps
1 2 3 4 5 6 7 8
TL-SL2210WEB
RESET
8+2G Web-Smart Switch
Power
100M
Link
Act
System 1000M
GIGA
Link/Act
Link/Act
R
Electronic elements including capacitance and inductance on the device can be affected
by external interferences, such as conducted emission by capacitance coupling,
inductance coupling, and impedance coupling. To decrease the interferences, please
make sure to take the following measures:
Use the power supply that can effectively filter interference from the power grid.
■
Installation