Installation Guide
Connection
Unmanaged Desktop PoE/PoE+ Switch
PC
IP Camera
AP
Ethernet Ports (1-8)
PoE Ports (1-4)
IP Phone
PoE Devices
PoE ports can also connect to non-PoE devices, but only transmit data.
Note:
Internet
Link/Act
Link/Act
On:
Link present but no activity
Flashing:
Transmitting/receiving data
Off:
No link
PoE Status
PoE Status
On:
PoE power provided
Flashing:
Current-overload/ Short-circuit
Off:
No PoE power provided
Power
Power
On:
Power on
Off:
Power off
© 2020 TP
-Link 7106509063 RE
V7.0.0
LED Explanation
DC Power Adapter
AC Power Cord
Switches Explanation
Note:
For simplicity, we will take TL-SF1008P for example throughout the Guide.
Off:
Ports run at 10/100 Mbps and support PoE power supply up to 100 m away.
On:
Ports run at 10 Mbps and support PoE power supply up to 250 m away.
Extend
(for TL-SF1008LP/TL-SF1008P/TL-SF1009P)
PoE MAX
PoE MAX
TL-SF1008LP
On:
34 W ≤ Total power supply < 41 W
Flashing:
Total power supply = 41 W
Off:
Total power supply < 34 W
TL-SF1008P
On:
59 W ≤ Total power supply < 66 W
Flashing:
Total power supply = 66 W
Off:
Total power supply < 59 W
TL-SF1009P
On:
58 W ≤ Total power supply < 65 W
Flashing:
Total power supply = 65 W
Off:
Total power supply < 58 W
Off:
The PoE Auto Recovery function is disabled.
On:
The switch will constantly detect the working status of a PoE powered device (PD).
When the switch finds that the PD works abnormally, the switch will reboot it.
Recovery
(only for TL-SF1008P)
Off:
Ports can transmit data with each other.
On:
Downlink ports cannot transmit data with each other. They can transmit data only with
the uplink port.
Isolation
(only for TL-SF1009P)
Off:
All the ports transmit data with the same priority.
On:
The specific ports transmit data with a higher priority than other ports.
Priority
(for TL-SF1008LP/TL-SF1008P/TL-SF1009P)
Note:
The numbers in brackets indicate the ports where the feature takes effect. For example, when Extend(1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.
