TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
4.5.3 MAC Filter
Choose “
Wireless
”
Æ
”
MAC Filter
”, you will see the screen of
Wireless--MAC
Filter
settings
shown as below.
Figure 4-90
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting
within your network’s RADIUS. To filter wireless users by MAC Address, either permitting or
blocking access. If you do not wish to filter users by MAC Address, select Disabled.
¾
Disabled:
Select this option to disable MAC Filter function.
¾
Allow:
Select this option to enable MAC Filter function that allow wireless access by the
devices listed on this screen.
¾
Deny:
Select this option to enable MAC Filter function that block wireless access from the
devices listed on this screen.
¾
Add:
Click this button to add the MAC Address.
¾
Remove:
Select the item of the MAC Address and click this button to remove it.
When you click the
Add
button, the pop-up picture shown below, and then you can type the MAC
Address in the
MAC Address
field.
)
Note:
The form of MAC Address must be “
xx:xx:xx:xx:xx:xx
”, like “
00:13:0A:55:FF:09
”.
Figure 4-91
When you finished making changes to the MAC Filter List screen, click
Save/Apply
to save the
changes.
85
