TP-Link TD-W8960N, Руководство пользователя

Страница: 63 / 122

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
¾ Use Interface: Select the Interface name in the text box, or else, the default Use Interface will
be adopted for the Static Route.
¾
Use Gateway IP Address: If you select the IPoE or IPoA mode for Use Interface , the
screen above will display this item, you should type the Gateway address correctly, and the
other option for
Use Interface will adopt the default Gateway address for the Static Route.
3. Click Save/Apply to and then you will see you settings as shown in Figure 4-53.
To remove a static routing entry:
1. Select the Remove check box according to the entry in the Figure 4-53.
2. Click the Remove button, and the entry will be deleted.
)
Note:
Gateway IP address should be correctly configure d if IP based Interface (IPoE, IPoA) i s selected.
4.4.10.3 RIP
Choose “ Advanced Setup ” Æ “ Routing ” Æ “ RIP ”, you can see the RIP (Routing Information
Protocol) screen which allows you to configure the RIP (shown in Figure 4-55).
Figure 4-55
)
Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).
To activate RIP for the device, configure an individual interface, select the desired RIP version and
operation, and select
Enabled checkbox for the interface.
Click Save/Apply to save the configuration.
56