TD-W8951ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
31
Figure 4-13
¾
Service name:
Specify a name for the PPPoA/PPPoE connection for recognition.
¾
Username:
Enter your username for your PPPoA/PPPoE connection to identify and verify
your account to the ISP.
¾
Password:
Enter your password for your PPPoA/PPPoE connection.
¾
Encapsulation:
For both PPPoA/PPPoE connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
¾
Bridge Interface:
Activate the option, the modem router can also work in Bridge mode.
¾
Connection:
For PPPoA/PPPoE connection, you can select
Always on
or
Connect
on-Demand
or
Connect Manually
. Connect on demand is dependent on the traffic. If there is
no traffic (or
Idle
) for a pre-specified period of time, the connection will drop down
automatically. And once there is traffic send or receive, the connection will be automatically
on.
¾
TCP MSS Option
：
Enter the TCP MSS as your desire. The default value is 1400.
¾
Default Route:
You should select
Yes
to configure the PVC as the default gateway to
Internet from this device.
¾
DHCP IPv6:
There are two types of assignation for IPv6 address: DHCP (Dynamic Host
Configuration Protocol) Server and SLAAC (Stateless address auto-configuration). Select
your assignation type accordingly.
¾
DHCP PD:
The
DHCP PD (Prefix Delegation) function is enabled by default. If you want to
