TP-Link RPS150, Руководство по установке

Страница: 9 / 20

04
Redundant Power Supply
Installation ChaCter 1
Package Contents 11C
Make sure that the package contains the following items. If any of the listed items is
damaged or missing, please contact your distributor.
Safety Precautions 111
To avoid any device damage and bodily injury caused by improper use, please observe
the following rules:
Safety Precautions
■
Keep the power off during the installation. Wear an ESD-preventive wrist strap, and
■
make sure that the wrist strap has a good skin contact and is well grounded.
Make sure that the input AC power voltage matches the specifications indicated on
■
the rear panel of the RPS150.
Before switching on the power, make sure that the power circuit will not be
■
overloaded, otherwise the RPS150 will work abnormally or be damaged.
Do not open or remove the cover of the RPS150, even if it is not electrified.
■
Before cleaning the device, cut off the power supply. Do not clean it by the waterish
■
cloth, and never use any other liquid cleaning method.
Site Requirements
■
To ensure normal operation and long service life of the device, please install it in an
environment that meets the requirements described in the following subsection.
Installation
One DC Power Cord and one
AC Power Cord One RPS150
This Installation Guide
RPS150
RPS2
Four fittings