Q1. What should I do if the Tether app cannot find my device?
1. Connect your smartphone to the extender’s network
TP-Link_Extender_2.4GHz
or
TP-Link_Extender_5GHz
.
2. Launch the Tether app, and select your extender.
Tip:
If you have connected to the extender’s Wi-Fi but still cannot find your device, turn off
your cellular data.
3. Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the LED doesn’t turn solid on after
completing setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi passwords for your host router during the
configuration. Check the passwords and try again.
Make sure the extender is close to your router, preferably within 16 feet, and
away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the
front page to complete the configuration.
Try setting it up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
LED
Status
Indication (For Range Extender Mode)
5GHz
On/Off
2.4GHz
Ethernet
On/Off
On/Off
The extender is connected or not connected to the
5GHz wireless network of your router.
The extender is connected or not connected to the
2.4GHz wireless network of your router.
The extender is on or off.
The system is starting up or firmware upgrade is in
progress.
Power
On/Off
Blinking
(Signal)
The extender is connected to your router’s wireless
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating
it closer to your router.
WPS connection is in progress.
No wireless connection is established.
Solid blue
Solid red
Blinking
Off
LED Explanation
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the
Reset
button until all LEDs
turn on momentarily, then release the button. The extender will reboot.
Res
et
Wi-Fi
Wi-Fi
TP-Link_Extender_2.4GHz
CHOOSE A NETWORK...
Other...
< Settings
TP-Link_Extender_5GHz
My Devices
Local Device
RE365
XX-XX-XX-XX-XX-XX
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
For passthrough devices, plug the power strips into the integrated electrical sockets
of the devices, but devices of the same or another type not be stacked in normal use.
Do not plug in a row.
TP-Link hereby declares that the device is in compliance with the essential requirements and
other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
For technical support, replacement services, user guides, and
other information, please visit
https://www.tp-link.com/support
,
or simply scan the QR code.
If you have any suggestions or needs for our product guides, you
are welcome to email
.
To communicate with TP-Link users or engineers, please join the
TP-Link Community at
https://community.tp-link.com
.
Method 2: Via a Web Browser
1.
Connect your computer or smartphone to the extender’s network. If you are
using a computer, unplug the Ethernet cable if any.
2.
Launch a web browser, enter
http://tplinkrepeater.net
in the address bar, and
log in.
3.
View or change extender settings as needed.
Method 1: Via the Tether App
1.
Connect your smartphone to the extender‘s or router’s network.
2.
Launch the Tether app, select your extender, and log in.
3.
View or change extender settings as needed.
Access Extender Settings
After setup, you can access extender settings via any of the methods below.
You can reselect host network, change extended network settings and more.
Note:
If your extender and router use the same network name,
Method 1
is recommended.
The Ethernet port is connected or not connected to
a powered-on device.
Tether
http://tplinkrepeater.net
http://tplinkrepeater.net
