66
The following table introduces how to configure these parameters:
From
Enter the sender’s E-mail address.
To
Enter the receiver’s E-mail address.
SMTP Server
Enter the IP address of the sender’s SMTP server.
Note:
At present, the domain name of SMTP server is not supported in
this field.
Enable
Authentication
If the sender’s mailbox is configured with You can check the box to
enable mail server authentication. Enter the sender’s username and
password.
Time Mode
Select Time Mode:
Fixed Time
or
Period Time
.
Fixed Time means that the system logs will be sent at the specific time
every day. Period Time means that the system logs will be sent at the
specific time interval.
Fixed Time
If you select
Fixed Time
, specify a fixed time to send the system log
mails. For example, 08:30 indicates that the mail will be sent at 8:30 am
everyday.
Period Time
If you select
Period Time
, specify a period time to regularly send the
system log mail. For example, 6 indicates that the mail will be sent every
six hours.
■
Server
If Server is configured, system logs will be sent to the specified system log server, and
you can use the syslog software to view the logs on the server.
Enable this feature and enter the IP address and port of the system log server.
System Log Server IP
Enter the IP address of the server.
System Log Server Port
Enter the port of the server.
More Client Detail Log
With the option enabled, the logs of clients will be sent to the
server.
2. Click
Save
.
