• Adapter shall be installed near the equipment and shall be easily accessible.
• The maximum distance to the receptacle is determined by the length of adapter cord.
• Only use the control provided with or specified by these instructions to control this device.
• Switch off the power supply to the device and allow sufficient time for it to cool before handling it.
• Suitable for dry and damp locations, keep the device away from water, fire, wet or hot environments.
• Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall.
• Do not use damaged charger to charge the device. Do not use any other charger than those recommended.
• Avoid placing controller box in areas surrounded by mental or near other devices designed to receive or transmit radio signals.
• Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are able to be read during replacing;
• Please disconnect this strip from AC outlet before cleaning. Do not use liquid or detergent to clean the product. Only use a dry cloth. Drop or fall
could cause injury.
•
Use only power supplies which are provided by manufacture and in the original packing of this product, if you have any questions, please don’t
hesitate to contact us.
• The National Electrical Code (NEC) does not permit cords to be concealed where damage to insulation may go unnoticed. To prevent fire danger, do
not run cord behind walls, ceilings, soffits, or cabinets where it may be inaccessible for examination. Cords should be visually examined periodically
and immediately replaced when any damage is noted.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Symbol
Explanation
Indoor use only
AC voltage
Direct current
