41
Select:
Select the desired port for Port Security configuration. It is
multi-optional.
Port:
Displays the port number.
Max Learned MAC:
Specify the maximum number of MAC addresses that can be
learned on the port.
Learned Num:
Displays the number of MAC addresses that have been learned
on the port.
Learn Mode:
Select the Learn Mode for the port.
•
Dynamic:
When Dynamic mode is selected, the learned
MAC address will be deleted automatically after the aging
time.
•
Static:
When Static mode is selected, the learned MAC
address will be out of the influence of the aging time and
can only be deleted manually. The learned entries will be
cleared after the switch is rebooted.
•
Permanent:
When Permanent mode is selected, the
learned MAC address will be out of the influence of the
aging time and can only be deleted manually. The learned
entries will be saved even the switch is rebooted.
Status:
Select Enable/Disable the Port Security feature for the port.
Note:
1. The Port Security function is disabled for the LAG port member. Only the port is removed from
the LAG, will the Port Security function be available for the port.
2. The Port Security function is disabled when the 802.1X function is enabled.
7.2 LAG
LAG (Link Aggregation Group) is to combine a number of ports together to make a single
high-bandwidth data path, so as to implement the traffic load sharing among the member ports in
the group and to enhance the connection reliability.
For the member ports in an aggregation group, their basic configuration must be the same. The
basic configuration includes
STP
,
QoS
,
GVRP
,
VLAN
,
port attributes
,
MAC Address Learning
mode
and other associated settings. The further explains are following:
z
If the ports, which are enabled for the
GVRP
,
802.1Q VLAN
,
Voice VLAN
,
STP
,
QoS
,
DHCP
Snooping
and
Port Configuration
(
Speed and Duplex
,
Flow Control
), are in a LAG, their
configurations should be the same.
z
The ports, which are enabled for the
Port Security
,
Port Mirror
,
MAC Address Filtering
,
Static MAC Address Binding
,
802.1X Authentication
and
IP Source Guard
, can not be
added to the LAG.
z
It’s not suggested to add the ports with
ARP Inspection
and
DoS Defend
enabled to the
LAG.
